Need used D16A6 w/ Tranny for core

[silverkorn]

Dont get any ideas im not swapping back to a D series, i need the engine and tranny for a rebuild core for a friend

Im looking for the engines you got laying around from old swaps, will pay and come pick up if need be

thanks

[pr3d]

i have a couple blocks/heads and tranny's laying around my garage.....but i'm sure you'll find someone local or closer to you..i'm all the way down in southern md. zip 20609 if you wanna drive that far...they're yours..

[silverkorn]

are the blocks and heads complete?

and how much you looking to get?

the more info the better and depending on what you got it might be worth while driving down there to get them

[b16bomber]

I'll be pulling my complete a6 out soon enough, and I have an si trany but it pops out of 3-5th.

I'm currently building a y8 motor and lookiingfor a fresh trans

[pr3d]

are the blocks and heads complete?

and how much you looking to get?

the more info the better and depending on what you got it might be worth while driving down there to get them

yea...i have two A6 blocks/heads in tact...i just took the heads off of one of them..one of them has 180k+ and the other has a lil over 120k on it....the one si tranny has bad synchro's the other tranny isn't as bad... i'll see if i can take some pictures for your...and how much i want them?...whatever you offer..i'll take..i just want them out of my garage...

[silverkorn]

well these things arent for me so i dont know what to offer.

you guys give me a number that you think is fair, pm them to me if you want, and i'll pass them on and see what he says.

Dave, if you need a tranny i could rebuild the one you got sitting there with new synchros and different gear ratios and such

[OBD1 Kenobi]

heheh I'll take one tranny to go please, with a side of fries.

[b16bomber]

well these things arent for me so i dont know what to offer.

you guys give me a number that you think is fair, pm them to me if you want, and i'll pass them on and see what he says.

Dave, if you need a tranny i could rebuild the one you got sitting there with new synchros and different gear ratios and such

I have 3 trannies all si.

- 88 si with a leaky diff

- 91 si with a 3rd gear grind and 250k

- 90-91 si that pops outta gear.


My ideal move would be to take the 88 si with NO GRINDS, and put in a new diff and seals.  If this is feasible, id  be more then willing to get u to do it, i can take the casing off and figure out a way to deliver the beast.  I wonder how much more it would be to do new synchros, the gears should all be good and im happy with the si final drive.   lemme know suckaaa and how much ud want to do it, maybe we can work something otu with the motor but its not gonna be outta my car for a little while, its too damn cold to be swapping anything.

[projectREX]

ive got an A6 out of 89 si. motor and tranny have about 190K. clutch done 500 miles before the swap and flywheel resurfaced. i got ecu, alt, starter, ect...   no motor mounts or wiring harness tho   located in northern DE   
also got cluster and sway bar off rex
i
 also have alot off 92 integra gsr if anyone out there cares
Off an integra-I also got flywheel off B17, A-frame off 92 integra gsr, front seats, i got the hood, no dents but paint sucks, i also have a rare set of stock fenders off integra that say VTEC,rear hatch (all in that green honda  color from the early 90s), the shift linkage, doors, headlights, tail lights, cruise control module,

[silverkorn]

im really only looking for the complete engine and tranny.

shoot me some prices, either PM or email, and if the prices are right i'll be by to pick it up.

[b16bomber]

i got a badass a6 with bent valves...gotta love it when the timing belt randomly snaps/   and now im rocking out the d15 that came in the 88 red crx i had.  strong motor.

[projectREX]

fuck a price!! you can have it if you can help me with a timing belt on B17. motor not running right and im sure thats the prob but i never done one and if i do it wrong and fuck up everything in my headf id cry myself to sleep for along time. i refuse to pay a shop to do anything to my cars so...kinda stuck in a fucked up spot. i work 6 days a week so on my day only day off i dont feel like fumbling around hoping to get it right. ill take aday off if someone can only make it on a certain day.   im moving to north carolina in the close future and plan on taking car down the weekend of st.pattys. if any1 interested tho let me know...other wise car will be waiting patently for me in Raleigh were i got the hillbillie hookup. gotta love freinds with nothing better to do then drink beer and fix cars!!!