The build of a B20 to Turbo

[CRX699]

I am wanting to do a B20B non-VTEC turbo build and did a search for internals and realy did not find anything. Does any one know where I can get the internals that will support a 8 lb. turbo boost and won't crap out in 3,000 miles. B18 Rods and crank are the same in both the B20B and the All B18's. The B20B has a different bore than the B18 with 84.5 in the B20B. So B18 rods and crank will work fine. The piston heads, seals, and so on need to befor the bore of the B20.

Thankx,

Sokee

[silverkorn]

if your only going to be runing 8psi you should ne fine on the stock internals, its all in the tuning. if your seriously only going to run 8psi then i would invest the money on your engine management before getting the block rebuilt.