CRXpower.net
February 06, 2012, 03:36:21 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
BC
 
   Home   Help Arcade Search Calendar Login Register  
Custom Search
CRXpower.net > General Forums > Forced Induction Discussion Board (Moderators: hondastaR, silverkorn, Spec) > Gasket
Pages: [1]
« previous next »
  Print  
Author Topic: Gasket  (Read 1492 times)
Spec
Administrator
Administrator
Resident Techie
*****

Karma: +5/-0
Offline Offline

Posts: 2058



View Profile WWW
« on: July 01, 2003, 09:48:26 AM »
I need a new gasket for the downpipe off my t3/t4 turbo, anyone know anywhere to get one?  It'd be for the T3 side, it's a sime rounded trianlge looking gasket with three bolt holes.  I haven't had the chance to look around for one so i figured i'd give the forced induction board something  Cheesy
Logged
CRXpower.net
« on: July 01, 2003, 09:48:26 AM »
 Logged
silverkorn
Administrator
Post Whore
*****

Karma: +5/-0
Offline Offline

Posts: 6816



View Profile WWW
« Reply #1 on: July 01, 2003, 10:02:59 AM »
sounds like a standard 3 bolt T3 gasket

dont know of anywhere off hand that sells them but shouldnt be a very hard thing to find

i would try calling some local performance shops first and see what they got in stock
Logged
'89 CRX Si W/ B16- Click Here for mods
TSR Motorsports
aimmotorsports
Wannabe Ricer
**

Karma: +0/-0
Offline Offline

Posts: 16


View Profile
« Reply #2 on: March 14, 2006, 08:21:30 AM »
with it just being a t3 flange you should be able to get it from any auto parts stores... have them look up a 280zx or thunderbird turbo coupe.
Logged
88 crx si soon to be powered by a turbo zc swap, gutted interior and alot of weight reduction! hopeing for 300 hp at the wheels and 1300 lbs!
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
Website hosted and maintained by Napier Communications Inc.
Page created in 0.045 seconds with 23 queries.