picture request of turbo bseries ef's

[r7]

someone please post some pictures of turbo'd bseries ef's, mainly the piping from the compressor outlet


wow, havn't posted here in long time! hey!

[silverkorn]

well since you havnt been here in a while there is a turbo forum now so i'll move the thread there

anyway so are you using a kit or is this custom?

usually they run it on the driver side and run it under the engine

[r7]

woopz, should have looked for new forum first!

i have a maxrev manifold, and downpipe.. compressor is on the passenger side..

[silverkorn]

did you get any pipeing or are you asking so you can figure out how to make the pipes go?

the easiest thing to do is flip the turbo around so that the downpipe goes under the tranny while your compressor is in line with your driver side. this way you can route the pipes to the driver side IC inlet, the route the IC outlet pipes straight to your TB.

[r7]

are you talking with a maxrev downpipe and manifold?

[cyberrexer]

This any help.....

http://www.turbocrx.co.uk/