Phatwhippin CRX
King Asshole!
Global Moderator
Post Whore
Karma: +1/-1
 Offline
Posts: 5165
|
 |
« on: December 06, 2002, 03:38:49 PM » |
|
Fuck cell phone companies, fuck insirance, and fuck hockey league fees......... I'm fucking broke, buy my shit! 
AEM CAI
-For 99-00 Civic Si, fits a B16 swapped CRX with slight modification to the CRX intake opening on the frame, as well as moving the battery to the rear, OR using a smaller battery. Powdercoated gunmetal, has a rubber hose clamp around the lower section where it touches the frame, to protect it from the metal digging into it (prevent further wear on it)...... $100
1g B16a Complete Block
-Complete JDM B16a block, less than 40k on it. Motor ran strong, needs nothing. Complete, from oil pan, oil filter, alternator, water pump, timing belt, etc... 100% all there......$200
BRAND NEW HAsport B Series EF swap Mounts
-Never been out of the box, Brand Spankin' new HAsport billet mounts. Best mount kit currently on the market. I ordered the set with the RACE stiffness rear mount, it's hard as a rock. Paid a tad over $400 3 weeks ago, would like to get most of it back...... $400
HAsport VTEC wiring harness
-Why spend $75+ going through them directly when you can get it for less here?? Necessary for any DOHC VTEC swap in a 4g Civic or 2g CRX, it's the compete VTEC harness. Used in conjunction with your stock wiring harness, and you're set to go. Includes all sensors/wires...... $50
ACT 6 Puck copper disc, ACT eXtreme Pressure Plate Combo
-Will work with any J1, S1, Y1, or A1 cable tranny. Alot of life left on the clutch, still grabs like a motherfucker. Trust me.... ...... $200
1989 CRX Si Shell
-No tail lights, headlights, seats, radio, brake assembly. Has a few dings here and there, need a passenger side fender, a new front bumper, and a hood (doesn't currently have them.. period.) Sunroof works, plastic interior is stripped out but I'll include it. Rust on both rear quarter panels, the sunrrof has only a SMALL bit under the weatherstripping. All the glass is OK, guage cluster is included, as well as heater control panel (small crack in it). Gonna need to be towed outta here, and ASAP...... $500 OBO
1989 CRX Si Seats
-Passenger side in mint condition, Drivers side a little worn, and a SMALL burn hole in it. Aside from that, they're still in decent condition for 13 year old seats in a car with 150k on it. Comes with the rails as well...... $150 OBO
Energy Suspension Bushing Master Kit
-Brand new in box, never been opened. Complete kit, almost every bushing you can think of. Just purchased last week, and I'll sell 'em for $20 less than I paid...... $120
Integra Brake Swap
-As far as I know, this will ONLY fit 2g CRXs and 4g Civics. COMPLETE from the upper control arm down. Calipers, rotors, hubs, wheel bearings, wheel studs. ball joints, etc. The rotors are 10.2" compared to the stock 9" discs. These brakes have brand new wheel bearings in them, Slotted/cross-dimple drilled EBC rotors, and Axxis Metal Master Pads. Rotors and pads have less than 2000 miles on them, with 90% life left, at least. The stock brake swap alone cost me $250..... let alone the $250 invested into them. Bolts right up in half an hour, and in my opinion, definitely worth the $$$......$300
1989 CRX Si Stock Brake setup
-Complete, good for HFs and DXs swapping a B16 in...... $100
'00 Jensen 500W 2ch Amp
-For the price, it's not a bad deal...... $50
1989 CRX Tail lights
-In good shape, 30 bucks
1989 CRX Si Air Condition Stuff
-Everything BUT the coolant lines..... $50
I've also got some misc shit like water pumps, alternators, starters, etc. I need to ditch for cheap. Lemme know what you need, I may have it. To anyone I receieved PMs/e-mails from, and didn't get a chance to return your mail, I apologize. It was actually just the other day I decided for sure I wanted to do this....
Have any Q's? Email me @ WRXRioT@aol.com , or PM me. My AIM is B16aTurboREX, and I'm on pretty often. Like I said, I'm looking to sell ASAP, but not looking to get low-balled. While being fair to you guys, I've gotta not cheat myself out. I think most of the prices are pretty reasonable.
I'm willing to ship anything I have, as long as you a willing to pay actual shipping costs for UPS ground. All prices above a without shipping included. For the most part, stuff is on a first-come first-serve basis, but I'm looking to make some $$ here, so money talks. Thanks guys, peace.....
-Phatty
|
|
|
|
|
Logged
|
Look who's back, bitches!
|
|
|
|
CRXpower.net
|
|
« on: December 06, 2002, 03:38:49 PM » |
|
|
|
|
|
|
Logged
|
|
|
|
Phatwhippin CRX
King Asshole!
Global Moderator
Post Whore
Karma: +1/-1
Offline
Posts: 5165
|
|
« Reply #1 on: December 11, 2002, 06:15:56 AM » |
|
c'mon bitches I gotta pay my shit off so I can get my WRX hehe
|
|
|
|
|
Logged
|
Look who's back, bitches!
|
|
|
|
jatt
|
|
« Reply #2 on: December 15, 2002, 07:27:16 PM » |
|
ill take the harness and the amp. hit me up at 215-676-2487 tomorrow anytime and leave a message with my brother... thanks
|
|
|
|
|
Logged
|
own with bush
|
|
|
|
PocketRocket
|
|
« Reply #3 on: December 15, 2002, 11:50:15 PM » |
|
Phatty, so the b16 is the block only right? what happened to the head? and if i buy the block from you, where can i get a good head for cheep?
thx, Oz
|
|
|
|
|
Logged
|
There's no shame in my game!"
|
|
|
|
Spec
|
|
« Reply #4 on: December 16, 2002, 04:50:04 PM » |
|
and if i buy the block from you, where can i get good head for cheep?
thx, Oz Couldn't resist... Phatty sell's good head he just didn't list that there :laugh:[/color] |
|
|
|
|
Logged
|
|
|
|
|
Blaze
|
|
« Reply #5 on: December 16, 2002, 06:38:51 PM » |
|
rofl... haha lol
thats great
Blaze
|
|
|
|
|
Logged
|
1 CRX DX
New Hood (old one would collect water when it rain'd)
B20 sitting in the house...
bucha misc. junk for the swap...
|
|
|
|
PocketRocket
|
|
« Reply #6 on: December 16, 2002, 10:10:43 PM » |
|
Couldn't resist...
Phatty sell's good head he just didn't list that there :laugh: R i g h t, How would you know??? lol, has he sold you some before? hehe  |
|
|
|
|
Logged
|
There's no shame in my game!"
|
|
|
|
civicrice
|
|
« Reply #7 on: January 09, 2003, 03:02:22 AM » |
|
hey... i might want that b16 as well...
|
|
|
|
|
Logged
|
he worst thing about being a clone, is that i have no one to blame but myself
|
|
|
|
tristatestyling
|
|
« Reply #8 on: January 09, 2003, 09:26:31 AM » |
|
take $400 for the shell and I will pick it up Sunday, if not then I have to drive to NY to pick up a 89 HF sunday that has everything except motor and trans. Let me know if you will save me a 2 hour drive and sell me yours.
|
|
|
|
|
Logged
|
|
|
|
|
b16bomber
|
|
« Reply #9 on: February 20, 2003, 10:42:25 AM » |
|
i just got a 91 dx crx and i was interested in the brakes. I need a whole new brake set-up so will they fit a 91? if not i have to get stock dxs, so if ur still checkin this, let me know
|
|
|
|
|
Logged
|
D-Series OWNS14.79@92.3 mph sohc 
|
|
|
|
Goldfingiz
|
|
« Reply #10 on: February 21, 2003, 12:49:15 AM » |
|
and if i buy the block from you, where can i get good head for cheep?
thx, Oz Couldn't resist... Phatty sell's good head he just didn't list that there :laugh:[/color] Oh man that is fucking hilarious!!!!!!!!!!!!!! |
|
|
|
|
Logged
|
|
|
|
|
cottagecreep
|
|
« Reply #11 on: February 21, 2003, 11:18:16 AM » |
|
and if i buy the block from you, where can i get good head for cheep?
thx, Oz Couldn't resist... Phatty sell's good head he just didn't list that there :laugh:[/color] Oh man that is fucking hilarious!!!!!!!!!!!!!! That is funny, hey Bob, wheres my suspension?  |
|
|
|
|
Logged
|
'd Ebay your life BIATCH!!! BUY MY EBAY STUFF HONDA, TURBO, SKIDOO My Ebay |
|
|
MGN_CRX89
Wannabe Ricer
Karma: +0/-0
Offline
Posts: 18
|
|
« Reply #12 on: January 06, 2005, 10:13:04 PM » |
|
you still got the tail lights and do you got pics
|
|
|
|
|
Logged
|
o fast to see, to loud to hear.
|
|
|
Dspencer81801
Newb
Karma: +0/-0
Offline
Posts: 4
|
|
« Reply #13 on: January 06, 2005, 11:29:44 PM » |
|
Phatty, so the b16 is the block only right? what happened to the head? and if i buy the block from you, where can i get a good head for cheep?
thx, Oz Hey pocket i have a head for that block that has been decked , port and polish and a 3 angle valve job. I also have manifold and disrtbuitor. Head has cams and is ready to bolt on. I will take $300 for it all. |
|
|
|
|
Logged
|
|
|
|
fast_rex 2006
Newb
Karma: +0/-0
Offline
Posts: 3
|
|
« Reply #14 on: January 06, 2006, 05:43:59 AM » |
|
u got a b16a for sale four 200 if so whats wrong with it if nothing how can i get it
|
|
|
|
|
Logged
|
|
|
|
|
