SlowDx
Wannabe Ricer
Karma: +0/-0
 Offline
Posts: 16
|
 |
« on: July 01, 2001, 03:00:59 AM » |
|
im pretty sure it was for sale because it was at a dealership :)...lol. The problem is it has no driver side door, seats or hood...lol
say if my insurance was to gimme money for what my cars worth or whatever if they say its not worth fixin it would i be able to put my hood and seats and door from my dx into the si if i was to buy it mad cheap?
I think the hood and seats will fit but i dunno bout the door...the engine has 86k and is mint :) any opinions are apriciated while im sleepin :) peaaace
i have a feelin no one is gonna understand this...im too tired i just got in and its 4:00 am almost :X
(Edited by SlowDx at 4:04 am on July 1, 2001)
|
|
|
|
|
Logged
|
|
|
|
|
CRXpower.net
|
|
« on: July 01, 2001, 03:00:59 AM » |
|
|
|
|
|
|
Logged
|
|
|
|
|
steel
|
|
« Reply #1 on: July 01, 2001, 05:40:07 AM » |
|
Yes, your DX Hood, door, and seats will fit the SI. However your DX door panel is different from the SI so it might look a little odd. Everything else is cool though. I think I wouldn't give anymore than 1,000 for it since it is missing all that. Depending on the body maybe only 500.
|
|
|
|
|
Logged
|
|
|
|
SlowDx
Wannabe Ricer
Karma: +0/-0
Offline
Posts: 16
|
|
« Reply #2 on: July 01, 2001, 10:12:20 AM » |
|
ya my friend said 逤 tops. the body is pretty #### mint just a LITTLE spot of rust but its like a 10 minute fix...lol. The engine is mint and the body so i dunno what i can manage but il try to get it under . Im gonna prob go tomoro since its sunday today and last night i went at like 2:00 am...well i guese that was this mornin :), i dunno i will keep you guys posted.
Oh ya this kid i know that got a like prob low 12 or high 11 second rex said he got a magazine at home that sellin a ls engine with tranny and ecu and some other stuff i think for 迀 :X il keep you posted on that too :) i dunno if its legit.
|
|
|
|
|
Logged
|
|
|
|
SlowDx
Wannabe Ricer
Karma: +0/-0
Offline
Posts: 16
|
|
« Reply #3 on: July 01, 2001, 12:30:07 PM » |
|
shit ha...i just found out it needs new front bumper and fender. I must of been real tired last night not to notice that lol. what to do what to do
|
|
|
|
|
Logged
|
|
|
|
Ghost1775
Newb
Karma: +0/-0
Offline
Posts: 2
|
|
« Reply #4 on: July 01, 2001, 02:32:17 PM » |
|
Dude you dont need a door?? Just remember to buckle up and hold on... and a hood??? a tarp works in the rain. you might need a seat though
|
|
|
|
|
Logged
|
peed is great, Sex is better... but try roadhead at 120mph...
|
|
|
|
CimorelliCRX
|
|
« Reply #5 on: July 01, 2001, 02:33:36 PM » |
|
Give the guy 500, buy a new fender(or if the one off the DX is good), and if your bumber off your DX is good, then take everything to a body shop, give them teh other 500 to put everything on. Taking a bumber and fender off the car is not that hard. There are a few bolts under the car, and under the molding, for the fender. And the bumber is very easy to get off. So after you take that stuff off, take it to the shop, give them the fender, and the bumper, have them put that stuff on the SI.
My opinion would to be do it yourself. It is very easy to do. I would buy the car for 500, and put 500 into performance into the car. All up to you, just some suggestions.
|
|
|
|
|
Logged
|
990 Honda CRX DX
blown Z6 w/si tranny, act clutch, fields vtec controller, flowmaster exhaust, intake, skunk 2 cam gear, b&m fuel pressure regulator, weapon-r coilovers, si wheels
|
|
|
|
masta shark
|
|
« Reply #6 on: July 01, 2001, 03:47:22 PM » |
|
if you can get it for 500, and its the same year as your dx (as long as ones not an 88 and the others not an 89-91) the door, fender, bumper, hood, etc... will all fit. the fenders from 88-89 are slitghly different from 90-91 with the corner lenses FYI.
|
|
|
|
|
Logged
|
I can think of no grander expression of arrogance than, in the face of every conceivable fact, one boasts of belief to the contrary
|
|
|
|
steel
|
|
« Reply #7 on: July 01, 2001, 04:15:45 PM » |
|
I think that Cimorelli has got a good idea.
|
|
|
|
|
Logged
|
|
|
|
SlowDx
Wannabe Ricer
Karma: +0/-0
Offline
Posts: 16
|
|
« Reply #8 on: July 01, 2001, 07:02:22 PM » |
|
thanks all...and Cimorelli too :)
|
|
|
|
|
Logged
|
|
|
|
|
CimorelliCRX
|
|
« Reply #9 on: July 01, 2001, 11:13:50 PM » |
|
Ohh shit, did I actually through out a good suggestion. God ####, mark this day down. lol Keep us updated on it DX
|
|
|
|
|
Logged
|
990 Honda CRX DX
blown Z6 w/si tranny, act clutch, fields vtec controller, flowmaster exhaust, intake, skunk 2 cam gear, b&m fuel pressure regulator, weapon-r coilovers, si wheels
|
|
|
SlowDx
Wannabe Ricer
Karma: +0/-0
Offline
Posts: 16
|
|
« Reply #10 on: July 02, 2001, 09:03:24 AM » |
|
headin up to talk to the dealer at 12:00 so i will keep you posted :)
|
|
|
|
|
Logged
|
|
|
|
|
Evil CRX
|
|
« Reply #11 on: July 03, 2001, 02:03:50 AM » |
|
Godd luck man I hope you got a pretty good deal on it. I know your going to have to put a lot of work into it but you'll have pride in the car because you had to do so much work to it. That's why I cried so hard when I totaled my DX. Lots and lots of work down the toilet.
|
|
|
|
|
Logged
|
989 Honda CRX Si Waiting on a new engine
1988 Honda CRX Si Lowered, Intake, welded on canister muffler. ugh it leaks. ACT stage 2 Clutch got some work to do. Currently looking for a Wings West RS Body Kit if anyone has one please pm me.
|
|
|
SlowDx
Wannabe Ricer
Karma: +0/-0
Offline
Posts: 16
|
|
« Reply #12 on: July 03, 2001, 09:42:33 AM » |
|
the owner wasnt there but one of the workers said that he doesnt think hes sellin it but there is a chance he will sell it to me since i have all the parts i need for it. so im gonna call today in a little bit and talk to the owner of the shop/dealership. Wish me luck :)...peace
|
|
|
|
|
Logged
|
|
|
|
|
