Got the motor to the shop today. Here is what I had done
Bored 40 over
Hot tanked-Magnafluxed Heads and Block
Wiseco forged pistons 8.5:1 compression
Port and Polished Heads-Knife Edge Dividers
Port Matched Intake
5 Angle Valve job-New valves
Balanced pistons
Shot peened-Polished-Resized-Balanced Forged Rods
Polished and Balanced Crankshaft
Static and Dynamic Balance
All new gaskets, seals, bearings, water pump, oil pump, vacuum hoses, belts...EVERYTHING is being replaced
Here are the pics. VERY LARGE PICS. 22 in all. 1.26 MB page...BEWARE
http://www.importpoweronline.com/engine/engine.htm
