CRXpower.net
May 22, 2012, 12:19:12 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Arcade Search Calendar Login Register  
Custom Search
CRXpower.net > General Forums > Import Discussion Board (Moderators: hondastaR, silverkorn, Spec) > 93 prelude vtec - ecu?
Pages: [1]
« previous next »
  Print  
Author Topic: 93 prelude vtec - ecu?  (Read 922 times)
r7
JDM Freak
*****

Karma: +0/-0
Offline Offline

Posts: 242


View Profile WWW
« on: July 06, 2001, 02:02:02 AM »
how do you reset the ecu on a 93 prelude (vtec) ?

new engine was just installed, and the engine light stays on, also, the rev limiter is set at about 6500 rpm, vtec is disabled.. someone has told me that the ecu is in 'saftey mode' or something like that?

how to reset this?
Logged
CRXpower.net
« on: July 06, 2001, 02:02:02 AM »
 Logged
83-1006198601
Guest
« Reply #1 on: July 06, 2001, 10:08:13 AM »
unhook your battery for about 10-15 minutes and then hook it back up and turn on the car and let it idle for about 5 minutes.  Thats how you do it to my knowledge :)
Logged
steel
Post Whore
*****

Karma: +0/-0
Offline Offline

Posts: 3573


View Profile
« Reply #2 on: July 06, 2001, 06:17:45 PM »
Make sure you have everything wired correctly, that might be the problem.  
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.15 | SMF © 2011, Simple Machines
Website hosted and maintained by Napier Communications Inc.
Page created in 0.036 seconds with 21 queries.