CRXpower.net
May 22, 2012, 12:16:43 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Arcade Search Calendar Login Register  
Custom Search
CRXpower.net > General Forums > Import Discussion Board (Moderators: hondastaR, silverkorn, Spec) > Installing both CV Axles
Pages: [1]
« previous next »
  Print  
Author Topic: Installing both CV Axles  (Read 615 times)
bob
Newb
*

Karma: +0/-0
Offline Offline

Posts: 2



View Profile WWW
« on: July 10, 2001, 12:11:49 PM »
I'm replacing both CV Axles on my 89 Honda CRX Si.

Does anybody knows the correct TORQUE Value of the Axle Hub Nut?

Is it 134 in-lbs?

I do not have a CRX Service Manual, and hope that someone on this board would be kind enough to look it up in there Service Manual.

I got the 134 in-lbs from an Acura Web Page.

Thank You Bob

Also, has anyone on this board has replaced there CV axles?  And did you have any problems installing them?
Logged
CRXpower.net
« on: July 10, 2001, 12:11:49 PM »
 Logged
NTeg99
Wannabe Ricer
**

Karma: +0/-0
Offline Offline

Posts: 18



View Profile WWW
« Reply #1 on: July 10, 2001, 01:24:02 PM »
Hi Bob!
Logged
'd do her in the butt!
83-1006198601
Guest
« Reply #2 on: July 10, 2001, 01:38:52 PM »
I'll try to make a note to look at my manual when I get home...  For further post about your crx it is probably best to post it in the Import discusion and not the topeka board though :)

I'm gonna go ahead and move it over there!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.15 | SMF © 2011, Simple Machines
Website hosted and maintained by Napier Communications Inc.
Page created in 0.39 seconds with 20 queries.