CRXpower.net
May 19, 2012, 10:42:01 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Arcade Search Calendar Login Register  
Custom Search
CRXpower.net > General Forums > Import Discussion Board (Moderators: hondastaR, silverkorn, Spec) > Zc valve adjusting... - What are they again..
Pages: [1]
« previous next »
  Print  
Author Topic: Zc valve adjusting... - What are they again..  (Read 310 times)
CimorelliCRX
C Series Freak
*****

Karma: +0/-0
Offline Offline

Posts: 1075


View Profile WWW
« on: May 19, 2002, 03:13:39 AM »
damn, I just asked this like 3 weeks ago at honda tech, but i forgot the stuff, anyone know the valve clearances of the ZC.
Logged
990 Honda CRX DX
blown Z6 w/si tranny, act clutch, fields vtec controller,  flowmaster exhaust, intake, skunk 2 cam gear, b&m fuel pressure regulator, weapon-r coilovers, si wheels
CRXpower.net
« on: May 19, 2002, 03:13:39 AM »
 Logged
SUperStreet
Cone Dodger
*****

Karma: +0/-0
Offline Offline

Posts: 587


View Profile
« Reply #1 on: May 19, 2002, 08:31:37 AM »
CYLINDER HEAD

Material -- Light Alloy
Thickness
New -- 132.0mm (5.20in)
Minimum after resurfacing -- 131.8mm (5.19in)
Maximum surface distoration -- 0.05mm (0.002in)
Valve seat angle -- 45O
Valve seat width (both intake and exhaust)
Minimum -- 1.25-2.00mm (0.049-0.08in)
Max -- 2.0mm (0.08in)



VALVES

Stem diameter
Intake -- 6.55-6.59mm (0.258-0.2594in)
Exhaust -- 6.52-6.56mm (0.257-0.2583in)
Stem-to-guide clearance
Intake -- 0.02-0.08mm (0.001-0.003in)
Exhaust -- 0.05-0.11mm (0.002-0.004in)
Valve clearance
Intake -- 0.13-0.17mm (0.0051-0.0067in)
Exhaust -- 0.15-0.19mm (0.0059-0.0075in)
Valve spring free length
Intake -- 44.8-45.8mm (1.76-1.80in)
Exhaust -- 46.1-47.1mm (1.81-1.85in)
Logged
9 teg
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.15 | SMF © 2011, Simple Machines
Website hosted and maintained by Napier Communications Inc.
Page created in 0.318 seconds with 20 queries.